NX-series digital input unit for general purpose use to High-speed synchronous control.16 Digital Inputs, Standard speed, PNP 24 VDC, screwless push-in connector, 12 mm wide.

High-speed I/O refreshing is possible by connecting with the NX-series EtherCAT Coupler
I/O refreshing can be synchronized with the control cycle of the Controller(Synchronous refreshing)
ON/OFF response time of the high-speed model is 100ns maximum
Screwless terminal block is detachable for easy commissioning and maintenance.
Screwless clamp terminal block and connector types are significantly reduces wiring work
Up to 16 digital inputs in a space-saving 12 mm width. (Connector Types 30 mm width)

NX-ID5442 16 Digital Inputs Omron Industrial Programmable Logic Controllers

Electrical and Mechanical Specifications

I/O system	NX I/O Bus
Type of module	Digital I/O
Number of digital inputs	16
Digital input type	PNP
Permitted voltage at input	15-28.8 V
OFF/ON delay	0.02-0.4 ms
Number of digital outputs	0
Digital output type	None
Short-circuit protected outputs	x
Connection method	1-wire
Signal processing	Free running, Standard speed, Synchronous
IO link master	x
I/O connection type	Push-in
Number of I/O connectors	1
Detachable I/O connector	√
Suitable for safety functions	x
SIL according to IEC 61508	None
Communication port(s)	None
Number of IOV (V+) terminals	0
Number of IOG (V-) terminals	0
Number of COM terminals	0
Degree of protection (IP)	IP20
Height	100 mm
Width	12 mm
Depth	71 mm
Weight	65 g

Circult layout

Terminal connection dlagram

Inquiry Cart 0